Support : [email protected] - Live support on business hours : 1-877-829-9417 (Toll Free)

Did you know that 80% of our business is car maintenance ?

 
Racingline VWR15G703 Dogbone Subframe Mount MQB 1.8/2.0

Usually Ships in 1 to 2 Days



Add to Cart

Brand : RacingLine
MFG Part # : VWR15G703
SEM Part # : VWR15G703
Price : CAD $ 358.00

Racingline VWR15G703 Dogbone Subframe Mount MQB 1.8/2.0
CAD $ 358.00 -0 % CAD $ 358.00

Racingline VWR15G703 Dogbone Subframe Mount MQB 1.8/2.0 ( Note that this mount doesn't fit the aluminium subframe MQB cars - such as TT, S3 )

To harness your power increases, and transfer that power to the track where you need it, our Uprated Drivetrain Mounts will give a much more solid drive, and crucially add durability to any high-powered or hard-driven car.
The whole engine and gearbox (the drivetrain) is located in just three places. The two upper mounts support the entire weight of the engine/gearbox, plus a third Lower Mount underneath the engine.   

  • Our Uprated Drivetrain Mounts are a CNC-machined, fully engineered replacement set of three mounts designed to greatly decrease engine and transmission movement, ensuring clean transfer of power to the track.   
  • The risk of wheel-hop under hard acceleration is almost eliminated as the whole engine and 'box assembly is firmly prevented from juddering when wheelspin occurs and through aggressive gearchages.
  • Available as a Lower Mount only for fast road use, and a full set of 3 Drivetrain Mounts for track/dragstrip/very high power cars.

TRANSFORM THE DRIVE

  • Transform the drive through eliminating wheel-hop off the line and through aggressive gearchanges.

EXTENSIVE DEVELOPMENT

  • Careful development of the durometer (stiffness) rating of the polymer used, meaning less compromise on NVH.

ADD STRENGTH

  • Essential upgrade for modified cars to keep the drivetrain properly located.

LOWER MOUNT

  • For road cars, we recommend just the Uprated Lower Engine Mount for the perfect compromise.

MQB DOGBONE 

  • MQB-platform Lower Mount kit includes a billet aluminium Torque Link, as the factory pressed steel part lacks the stiffness needed.

DO I NEED UPRATED MOUNTS?

OK, these Mounts aren't the most visible or sexy of modifications. But for those in the know, with high-power cars or who use their car regularly on track, our Uprated Engine Mount Set is truly one of the most worthwhile upgrades to the driving dynamics of their car. Suitable for either DSG or manual cars.

  • The Uprated Full Set of Engine Mount stiffens the whole location of the drivetrain greatly to give a much tighter, sharper feeling to your car. It removes the loose feeling when coming on and off-throttle during aggressive gearchanges, and banishes wheel-hop under hard acceleration as the whole engine and 'box assembly judders.
  • This adds strength to the drivetrain, helping to protect from future wear and breakages. Rather than some aftermarket 'push in' bushes which crudely fill the voids in the original factory mounts, the RacingLine mounts are a completely redesigned replacement mount assembly and torque link. 
  • Make no mistake, the full uprated engine mount kit is a relatively extreme modification to make to your car. Naturally, more noise from the drivetrain comes into the cabin (and more than when the Lower Engine Mount only is fitted), but most keen drivers love the sense that they are more 'connected' to their car, and the gentle 'growl' that the mount conveys.  Allow a few hundred miles/kms of driving for the mount to settle in after installation.

LOWER MOUNT

For most hard-driven road cars, we recommend starting with the Lower Mount only. You can always add the two upper engine and gearbox mounts at a later stage.

  • A lot the fore/aft movement in the drivetrain is controlled by the Lower Mount - meaning that changing it alone makes a big difference to your drive.
  • The additional two upper mounts add more strength, but also add in more NVH (noise, vibration, harshness).
  • Our MQB platform Lower Mount also includes a billet aluminium Torque Link.  Our testing showed that the pressed steel part used on the MQB-platform cars lack the stiffness needed. Note that this mount doesn't fit the aluminium subframe MQB cars - such as TT, S3.

PRECISION ENGINEERED FOR PERFECT PERFORMANCE

  • The mounts and torque link start life as a billet of T6000 Aluminium.
  • Meticulously machined 
  • with the latest CNC technology.
  • Our polymer mix of different durometer (hardness) ratings which allow some compliance, yet filters much of the drivetrain's vibration.
  • Available for MQB and A5-platform cars.

This product may not fit all vehicles listed. Please guarantee that this is the correct part for your application, or contact us for more information. At times our suppliers may substitute a brand of similar or equal quality, without our prior knowledge. If you require a specific brand for your application, call us before ordering.

Application Guide

Similar Products

Racingline VWR12G7R600ITINLET Turbo Inlet MQB 1.8/2.0

CAD $ 195.00

Racingline VWR13G700 Oil Catch Can System MQB 1.8/2.0

CAD $ 743.00

Strictly European Motors Ltd : German Auto Parts Supplier

Canadian German auto parts supplier and maintenance facility for Volkswagen / Audi / Porsche specializing in Parts Sales / Repair / Maintenance. Located in Toronto Ontario Canada. Lowest Prices & Fast Shipping! www.semmotorsports.com

Liqui Moly Molygen 5W40 LM20232 5L

CAD $ 55.00

Liqui Moly Leichtlauf High Tech 5W40 Synth Oil (5L) LM2332

CAD $ 52.50

Sachs Performance Clutch Kit Volkswagen 001422.999502

CAD $ 995.00

1.8T Transverse Intake Manifold

CAD $ 949.99 Sold Out